Set of 8 Solid Brass Posts
$ 24.00
Time to replace your posts ?
Included are eight solid brass posts, and 8 washers and 8 machine screws – 8-32 thread.
Posts are 1/2 inch tall x 7/16 inch diameter. The new rubber on the posts is Tygon / chemical resistant and should last indefinitely. See instructions below
Free shipping to Contiguous USA
Inquire about shipping to Canada, International, or Expedited
Discount for In-Person Pickup in Santa Fe
(We are wearing masks and gloves during the pandemic)
Note: Limited Quantity. Only one order per customer
Happy Flicking
In stock (can be backordered)
Description
Posts are 1/2 inch tall x 7/16 inch outside diameter
Posts are 1/2 inch tall x 7/16 inch outside diameter
To replace the old posts on your gameboard:
a) Place your gameboard in a well padded safe position to avoid any contact with wood or metal that could harm your board.
Use a towel or padded cloths for protection.
b) Remove the screws from the backside using a slotted screwdriver. ( If you are not handy with tools, find someone who is)
c) Using either the old screws or the new screws, reinsert the posts and tighten snugly with a screwdriver.
If the screws don’t tighten enough, use the included washers, but in most cases, that won’t be necessary.
The new rubber tubing is a chemical resistant tubing called Tygon from McMaster-Carr and they should last indefinitely. The old rubber was ‘surgical’ grade tubing and we thought they would last indefinitely, but they seemed to have a lifetime of about 10 years.
Happy Flicking !
Additional information
| Weight | .25 lbs |
|---|---|
| Dimensions | 3 × 6 × 1 in |
